speed up firefox

increse the speed of ur broad band connection
Firefox speed Up
Firefox speed Up
FireFox Load Time

1. Type “about:config” into the address bar and hit return. Scroll
down and look for the following entries:

network.http.pipelining
network.http.proxy.pipelining
network.http.pipelining.maxrequests

Normally the browser will make one request to a web page at a time.
When you enable pipelining it will make several at once, which really
speeds up page loading.

2. Alter the entries as follows:

Set “network.http.pipelining” to “true”

Set “network.http.proxy.pipelining” to “true”

Set “network.http.pipelining.maxrequests” to some number like 30. This
means it will make 30 requests at once.

3. Lastly right-click anywhere and select New-> Integer.
Name it “nglayout.initialpaint.delay” and set its value to “0”.
This value is the amount of time the browser waits before it acts on information it recieves.

If you’re using a brodband connection you’ll load pages 2-3 times faster now.

how to repair xp and save ur time.

Last known good config: Always the easiest to try first before settling for a reinstallation of Windows XP. Reboot the PC and tap F8 while you wait for boot options to be displayed for you. Once there, choose “Last known good configuration.”

System restore: In some cases, a reinstallation can be avoided by using system restore. If you are unable to get system restore to work from within safe mode, you can try to access it from within a command prompt. You do not need to leave safe mode to do this, just follow these instructions closely:

Reboot into safe mode with a command prompt.
Get to an administrator account so that you have the needed permissions to get things done.
At the command prompt, type: %systemroot%\system32 restore strui.exe
Follow the instructions to restore your PC to an earlier state of operation.
Recovery console: The XP recovery console can be a very useful utility when employed with care. There are a variety of situations where having access to it can be really handy. In fact, you need to get access to it before we go any further.

Reboot from the Windows XP CD. Once you arrive at the welcome screen, choose “R” for recovery.
You will be asked which Windows installation you wish to access. Choose the appropriate number.
Now a prompt for your administrator password will appear. Enter it and continue (if no password, press enter).
Now we are ready to roll up our sleeves and get to work. While at the console, you can type help for a list of available commands that are at your disposal. For example, you can repair a messed up boot sector by typing FIXBOOT and then typing enter afterward. If you are having difficulty booting up because of a messed up ntldr file, however, then you might need to replace it by typing:
COPY E:\i386\NTLDR C:
(Keep in mind this is assuming that E: is the correct drive letter for your CD ROM drive). Once you have repaired what you have needed to from the recovery console, simply type EXIT at the prompt to leave and restart Windows.
When all else fails, sometimes reinstalling is the best medicine. Below, we will look at two very different methods to accomplish this.

Repair installation: Running a repair install of Windows XP can be a handy way of fixing the installation of XP without having to start totally over and deleting important data from your PC. To do this type of install, simply follow these instructions.

Boot from your XP installation CD.
At the welcome screen, choose enter.
Once at the license agreement, press F8.
At the next screen, choose to repair the selected Windows XP installation by pressing R.
The files will begin to install and then your PC will reboot. During the reboot you will be presented with option of booting from the CD again by pressing any key. Don’t press anything. Allow it to finish the install without booting from the CD again.

Full reinstallation of Windows XP: If all else fails and you are ready to completely delete everything on your hard drive, then you are ready to do a full reinstallation.
You will be erasing everything, so make sure you already have a backup of any important data before you continue. Follow the instructions above ’til you arrive at step 4. At that point, choose to continue installing a fresh copy of XP on your system and NOT the repair option. Black Viper has a great walkthrough that will take you step by step through the nuances of setting up your partitions, formatting, etc.

add "ur stuff" to send to

Opening Files in Notepad
To send the files to notepad, follow the steps below:
1. Go to %SystemDrive%\documents and settings\%username%\sendto
2. Right click on the right hand panel and select “New|Shortcut”
3. Create a new shortcut to notepad.exe in to the sentto folder.

Now if you right click any REG, TXT, VBS, CMD, DAT, NFO file, you can chose the “Send to” menu and send the file to Notepad which will immediately open it for editing.

Hacking windows SEND TO MENU
I know this is a very simple thing but the problem, as like many other issues, is the ignorance about it.

How often do you copy songs from a CD? Or some photos from a CD?

What do you do? You select the required files and do a CTRL –C. Open the destination folder and do a CTRL-V. Here is something you can benefit time from. Customize your SEND TO MENU.

This sounds simple and you can do it in less than sixty seconds.
You can create your own BASKET.

First you’ll need access to hidden files. So change your view settings to make all hidden files visible.
Tools -> folder options -> view (tab) and select the show hidden files and folders.
go to parent drive:/documents and settings/(user name)/send to

Open up my computer and locate your most used folders.

Create a shortcut of the most used folders in SEND TO FOLDER.You can do this in a number of ways.

Right click -> send to desktop(create shortcut) and move the shortcut from the desktop to the SEND TO FOLDER

Copy the most used folder and go to SEND TO FOLDER and right click -> paste shortcut.

Also remember to rename the shortcuts to send to videos or send to potos. We don’t need confusion when we use the same later.

5. DONE

listen fm radio on gtalk

add

service@gtalk2voip.com

to ur gtalk.

after that

select radio stations

LIST OF AVAILABLE RADIO STATIONS:

100 – 181.fm – Kickin’ Country (Todays Best Country!), http://scfire-chi0l-1.stream.aol.com:80/stream/1075
101 – 1.FM – Country, http://64.62.194.11:8020/
102 – Atlantic Sound Factory – ASF Radio, http://69.31.50.146:80/
103 – 100.7 Jack FM, San Diego, http://38.116.132.31:9024/
104 – 102.7 FM The Fringe, http://64.72.124.89:8134/
105 – 181.fm – The Buzz (Your Alternative Station!), http://scfire-nyk0l-1.stream.aol.com:80/stream/1022
106 – 181.fm – The Mix Channel (70s, 80s, 90s and Today’s Best Music) , http://208.53.158.167:8032/
107 – 181.fm – The Eagle (Your Home For REAL Classic Rock!), http://208.53.158.126:8030/
108 – .977 The 80s Channel, http://scfire-ntc0l-2.stream.aol.com:80/stream/1040
109 – 1.FM – Channel X, http://209.51.161.54:8072/
110 – Teen Taal Radio (HINDI), http://213.251.129.40:8022/
111 – Radio Helsinki – 92.6 MHz, http://88.198.49.11:8000/live56.ogg
201 – KCRW World News, http://scfire-ntc0l-2.stream.aol.com:80/stream/1047
202 – Sporting News Radio, http://scfire-chi0l-2.stream.aol.com:80/stream/1057
203 – KPFK – Southern California’s 90.7 FM News, Talk & Music, http://64.27.31.66:80/
204 – WBUR 90.9 FM, Boston’s NPR News Station, http://205.234.188.21:80/
205 – TalkRadioX — http://talkradiox.com, http://tv.stream-music.net:8332/
206 – Arabian HIT 96.7 FM, Dubai, http://wm-live.abacast.com/arabian_radio-hitfm-24

To connect, type RADIO number where number is a station numerical ID from the list above.

like u wanna listen hindi songs then type radio 110

and then recieve the call… that will b ur radio call

other services

*====== AVAILABLE COMMANDS ======*
HELP – Display this message.
MYPAGE – Display URL to your personal account page.
WEBCALL – Display URL to your personal Web Call.
DICT word – Make a request to DICT.ORG for word definitions.
MSG to text – Send off-line message text to user to .
IM to text – Send Instant Message text to user to . Example: IM msn:billgates@hotmail.com Hello Billy!
VMLIST – Display content of your voice mail box.
VMPLAY id – Play voice mail message number id .
VMDEL id – Delete voice mail message number id
VMSEND user – Send voice mail to other gtalk user .
CONF – Create conference room for you. Room cookie will be sent back.
JOIN cookie – Join someone’s else conference room using cookie .

COST phone – Display amount of credits charged for 1min unit while calling to phone . Example, to figure price for calling american 800 services type: COST 1-800
CREDITS – Go buy more credits.
CALL phone [via] – Make an outgoing voice call to telephone number phone which is represented in E.164 format. Example, to call Google type: CALL 1-650-253-0000 . You can also setup a registered service provider name in optional via parameter to place call throu.
CALL sipuser@sipprovider.com – Make an outgoing voice call to SIP phone sipuser@sipprovider.com . Example: CALL pbx@stalker.com .
DTMF_TONES : Type in any string of digits or Asterisk or # sign while talking to send DTMF tones.
SMS phone_number text – Send text an SMS message to phone . Example: SMS +1-234-5678901 Hello, just testing

Some Hidden Features in XP

1. Application Secrets.

Defrag
Secret – Hidden Command Line Switch
Instructions – Go to “Start”, “Run” and Type defrag c: -b to defragment the Boot and Application Prefetch information. Similar to what BootVis invokes.

Paint
Secret – Image Trails
Instructions – Open an image and hold down Shift then drag the image around to create an image trail.

Secret – 10 X zoom
Instructions – Open an image and select the magnifying glass icon. Left-click exactly on the line below the 8 X.

2. OS Secrets.

Add/Remove
Secret – Hidden Uninstall Options
Instructions – Warning: Proceed at your own risk.
Browse to C:\Windows\inf\ and make a backup copy of sysoc.inf. Then open the original file C:\Windows\inf\sysoc.inf in notepad. Go to “Edit” and select “Replace”. In “Find what” type, hide and in “Replace with:” type, then select “Replace All”, save and close the file. Go to the control panel, “Add/Remove”, select “Add/Remove Windows Components”. You will now see many more Windows components to uninstall. Do not remove anything with no label or that you do not recognize or fully understand what it does. Doing so can break certain functionality in Windows.

Control Panel
Secret – Hidden Control Panel Extensions
Instructions – Download and install Tweak UI, launch, go to “Control Panel” and check any item not selected, then “Apply” and “OK”. You will now see the hidden control panel extensions.

Device Manager
Secret – Hidden Devices
Instructions – Go to the control panel, “System” icon, “Hardware” tab and select “Device Manager”. Select View and Show hidden devices.

Music
Secret – Music from the Installer
Instruction – Browse to C:\Windows\system32\oobe\images\title.wm

a and play

Shutdown
Secret – Display Hibernate Option on Shut Down dialog.
Instructions – Go to “Start”, “Turn Off Computer” and press either Shift key to change “Stand By” button to “Hibernate”.

3. Game Secrets

FreeCell
Secret – Instant Win
Instruction – Hold down Ctrl + Shift + F10 during game play. Then you will be asked if you want to Abort, Retry or Ignore. Choose Abort, then move any card to instantly win.

Secret – Hidden Game Modes
Instruction – In the “Game” menu choose “Select Game”. Enter -1 or -2 to activate the hidden game modes.

Minesweeper
Secret – Reveal Mines
Instructions – Minimize or close all running applications. Launch Minesweeper, then type xyzzy. Next hold down either shift key for one second. Now when you move the mouse cursor over a Minesweeper square you will see a tiny pixel in the top left corner of your desktop screen. This pixel will change to black when your mouse moves over a mine. You may need to change you desktop background to a solid color other then white or black to see the pixel.

Pinball
Secret – Extra Balls
Instructions – Type lmax at the start of a new ball to get extra balls.

Secret – Gravity Well
Instructions – Type gmax at the start of a new game to activate Gravity Well.

Secret – Instant Promotion
Instructions – Type rmax at the start of a new game to go up in ranks.

Secret – Skill Shot
Instruction – Launch the ball partially up the chute past the third yellow light bar so it falls back down to get 75.000 points. There are six yellow light bars that are worth a varying amount of points :
First: 15.000
Second: 30.000
Third: 75.000
Fourth: 30.000
Fifth: 15.000
Sixth: 7.500

Secret – Test MOde
Instructions – Type hidden test at the start of a new ball to activate Test Mode. No notification will be given that this is activated but you can now left-click the mouse button an drag the ball around.

Secret – Unlimited Balls
Instructions – Type bmax at the start of a new ball. No notificatin will be given that this is activated but when a ball is lost a new ball will appear from the yellow wormhole indefinitely. Once this is activated you will be unable to activate other secrets without restarting the game.

Solitaire
Secret – Instant Win
Instruction – Press Alt + Shift + 2 during game play to instantly win.

Secret – Draw single cards in a Draw Three game
Instruction – Hold down Ctrl + Alt + Shift while drawing a new card. Instead of drawing three cards you will only draw one.

shortcut keys of windows xp

short cut keys of windows xp

1
Ctrl + Shift + A
AllCaps
Makes the selection all capitals (toggle)

2
Alt + Ctrl + 1
ApplyHeading1
Applies Heading 1 style to the selected text

3
Alt + Ctrl + 2
ApplyHeading2
Applies Heading 2 style to the selected text

4
Alt + Ctrl + 3
ApplyHeading3
Applies Heading 3 style to the selected text

5
Ctrl + Shift + L
ApplyListBullet
Applies List Bullet style to the selected text

6
Alt + F10
AppMaximize
Enlarges the application window to full size

7
Alt + F5
AppRestore
Restores the application window to normal size

8
Ctrl+B
Bold
Makes the selection bold (toggle)

9
Ctrl + PgDn
BrowseNext
Jump to the next browse object

10
Ctrl + PgUp
BrowsePrev
Jump to the previous browse object

11
Alt + Ctrl + Home
BrowseSel
Select the next/prev browse object

12
Esc
Cancel
Terminates an action

13
Ctrl+E
CenterPara
Centers the paragraph between the indents

14
Shift+F3
ChangeCase
Changes the case of the letters in the selection

15
Left arrow
CharLeft
Moves the insertion point to the left one character

16
Shift + Left arrow
CharLeftExtend
Extends the selection to the left one character

17
Rt arrow
CharRight
Moves the insertion point to the right one character

18
Shift + Rt arrow
CharRightExtend
Extends the selection to the right one character

19
Alt + Shift + C
ClosePane
Closes the active window pane (if you are in Normal View and have, for example, the Footnote pane open)

20
Alt+Drag (or press Ctrl + Shift + F8 and drag, but Alt + Drag is far easier!)
ColumnSelect
Selects a columnar block of text

21
Ctrl +Shift+C
CopyFormat
Copies the formatting of the selection

22
Shift + F2
CopyText
Makes a copy of the selection without using the clipboard (press Return to paste)

23
Alt + F3
CreateAutoText
Adds an AutoText entry to the active template

24
Ctrl+ Backspace
DeleteBackWord
Deletes the previous word without putting it on the Clipboard

25
Ctrl + Del
DeleteWord
Deletes the next word without putting it on the Clipboard

26
Ctrl+W, Ctrl+F4
DocClose
Prompts to save the document and then closes the active window. (But doesn’t intercept the menu command)

27
Ctrl + F10
DocMaximize
Enlarges the active window to full size

28
Ctrl + F7
DocMove
Changes the position of the active window

29
Ctrl + F5
DocRestore
Restores the window to normal size

30
Ctrl + F8
DocSize
Changes the size of the active window

31
Alt + Ctrl + S
DocSplit
Splits the active window horizontally and then adjusts the split

32
Alt + Shift + F9
DoFieldClick
Executes the action associated with macrobutton fields

33
Ctrl + Shift + D
DoubleUnderline
Double underlines the selection (toggle)

34
Alt R, G
DrawGroup
Groups the selected drawing objects

35
Alt R, I
DrawSnapToGrid
Sets up a grid for aligning drawing objects

36
Alt R, U
DrawUngroup
Ungroups the selected group of drawing objects

37
Ctrl+Shift+F5 (Or: Alt I, K)
EditBookmark
Brings up the bookmark dialog

38
Del
EditClear
Performs a forward delete or removes the selection without putting it on the Clipboard

39
Ctrl+C
EditCopy
Copies the selection and puts it on the Clipboard

40
Ctrl+X
EditCut
Cuts the selection and puts it on the Clipboard

41
Ctrl+F
EditFind
Finds the specified text or the specified formatting

42
F5, Ctrl+G
EditGoTo
Jumps to a specified place in the active document

43
Alt E, K
EditLinks
Allows links to be viewed, updated, opened, or removed

44
Ctrl+V
EditPaste
Inserts the Clipboard contents at the insertion point

45
Alt E, S
EditPasteSpecial
Inserts the Clipboard contents as a linked object, embedded object, or other format

46
Alt + Shift + Backspc
EditRedo
Redoes the last action that was undone

47
F4
EditRedoOrRepeat
Repeats the last command, or redoes the last action that was undone (unfortunately, doesn’t work for as many commands in Word 2000 as in Word 97 and below, but this is still one of Word’s most useful shortcuts, if not the most useful)

48
Ctrl+H
EditReplace
Finds the specified text or the specified formatting and replaces it

49
Ctrl+A
EditSelectAll
Selects the entire document

50
Ctrl+Z
EditUndo
Reverses the last action

51
Alt + PageDn (to select to end of column, use Alt + Shift + PgDn)
EndOfColumn
Moves to the last cell in the current table column

52
Ctrl+Shift+End
EndOfDocExtend
Extends the selection to the end of the last line of the document

53
Ctrl+End
EndOfDocument
Moves the insertion point to the end of the last line of the document

54
End
EndOfLine
Moves the insertion point to the end of the current line

55
Shift+End
EndOfLineExtend
Extends the selection to the end of the current line

56
Alt+End
EndOfRow
Moves to the last cell in the current row

57
Alt + Ctrl + PgDn
EndOfWindow
Moves the insertion point to the end of the last visible line on the screen

58
Shift + Alt + Ctrl + PgDn
EndOfWindowExtend
Extends the selection to the end of the last visible line on the screen

59
F8 (press Esc to turn off)
ExtendSelection
Turns on extend selection mode and then expands the selection with the direction keys

60
Alt + F4 ()
FileCloseOrExit
Closes the current document, or if no documents are open, quits Word. Horrible command, as it makes it a long winded business to quit Word. But there’s a simple solution – assign Alt+F4 to FileExit instead.

61
Alt + F4 (Word 97)
FileExit
Quits Microsoft Word and prompts to save the documents (does intercept the menu item, but not the keyboard shortcut, or the x button. An AutoExit macro is usually a better way of intercepting this).

62
NOT Ctrl+N!!
FileNew
Creates a new document or template (brings up the dialog). Note that: Word pretends that Ctrl+N is assigned to FileNew but it isn’t, it’s assigned to FileNewDefault You can fix this in Word 2000 by assigning Ctrl+N to the FileNewDialog command. In Word 97 the only way to fix it is to create a macro called FileNew (to do this, press Alt + F8, type “FileNew” without the quotes and Click “Create”. The macro will automatically contain the code needed to make it work).

63
Ctrl+N
FileNewDefault
Creates a new document based on the Normal template.

64
Ctrl+O
FileOpen
Opens an existing document or template

65
Alt F, U
FilePageSetup
Changes the page setup of the selected sections

66
Ctrl + P
FilePrint
Prints the active document (brings up the dialog
)

67
Ctrl+F2
FilePrintPreview
Displays full pages as they will be printed

68
Alt F, I
FileProperties
Shows the properties of the active document

69
Ctrl+S
FileSave
FileSave

70
Alt F, A (or F12)
FileSaveAs
Saves a copy of the document in a separate file (brings up the dialog)

71
Ctrl+Shift+F
Font
Activates the Fonts listbox on the formatting toolbar

72
Ctrl+Shift+P
FontSizeSelect
Activates the Font Size drop-down on the formatting toolbar

73
Alt + Ctrl + K
FormatAutoFormat
Automatically formats a document (or sometimes, automatically screws it up)

74
Alt O, B
FormatBordersAndShading
Changes the borders and shading of the selected paragraphs, table cells, and pictures

75
Alt O, E
FormatChangeCase
Changes the case of the letters in the selection

76
Alt O, C
FormatColumns
Changes the column format of the selected sections (brings up the dialog)

77
Alt O, D
FormatDropCap
Formats the first character of current paragraph as a dropped capital (must select it first)

78
Ctrl+D
FormatFont
Brings up the Format + Font dialog

79
Alt + Shift + R
FormatHeaderFooterLink
Links the current header/footer to the previous section (but does not intercept the button on the Header Footer toolbar)

80
Alt O, P
FormatParagraph
Brings up the Format Paragraph dialog

81
Alt O, S
FormatStyle
Applies, creates, or modifies styles

82
Alt O, T
FormatTabs
Brings up the Format Tabs dialog

83
Shift + F5
GoBack
Returns to the previous insertion point (goes back to up to 3 points, then returns to where you started; this is one of the most useful shortcuts of them all. Also useful when opening a document, if you want to g straight to where you were last editing it)

84
Ctrl + >
GrowFont
Increases the font size of the selection

85
Ctrl + ]
GrowFontOnePoint
Increases the font size of the selection by one point

86
Ctrl + T (or drag the ruler)
HangingIndent
Increases the hanging indent

87
F1
Help
Microsoft Word Help

88
Shift + F1
HelpTool
Lets you get help on a command or screen region or examine text properties

89
Ctrl + Shift + H
Hidden
Makes the selection hidden text (toggle)

90
Click on it
HyperlinkOpen
Connect to a hyperlink’s address

91
Ctrl + M (or drag the ruler)
Indent
Moves the left indent to the next tab stop

92
Alt + Ctrl + M (or Alt I, M)
InsertAnnotation
Inserts a comment

93
F3
InsertAutoText
Replaces the name of the AutoText entry with its contents

94
Alt I, B
InsertBreak
Ends a page, column, or section at the insertion point

95
Alt I, C
InsertCaption
Inserts a caption above or below a selected object

96
Ctrl + Shift + Return
InsertColumnBreak
Inserts a column break at the insertion point

97
Alt + Shift + D
InsertDateField
Inserts a date field

98
Alt + Ctrl + D
InsertEndnoteNow
Inserts an endnote reference at the insertion point without displaying the dialog

99
Alt I, F
InsertField
Inserts a field in the active document

100
Ctrl+F9
InsertFieldChars
Inserts an empty field with the enclosing field characters

101
Alt I, L
InsertFile
Inserts the text of another file into the active document

102
Alt I, N
InsertFootnote
Inserts a footnote or endnote reference at the insertion point

103
Alt + Ctrl + F
InsertFootnoteNow
Inserts a footnote reference at the insertion point without displaying the dialog

104
Ctrl + K
InsertHyperlink
Insert Hyperlink

105
Alt I, D
InsertIndexAndTables
Inserts an index or a table of contents, figures, or authorities into the document

106
Alt + Ctrl + L
InsertListNumField
Inserts a ListNum Field

107
Alt + Shift + F
InsertMergeField
Brings up a dialog to insert a mail merge field at the insertion point. (It does not intercept the button on the Mail merge. toolbar)

108
Ctrl + Return
InsertPageBreak
Inserts a page break at the insertion point

109
Alt + Shift + P
InsertPageField
Inserts a page number field

110
Ctrl + Shift + F3
InsertSpike
Empties the spike AutoText entry and inserts all of its contents into the document

111
Alt + Shift + T
InsertTimeField
Inserts a time field

112
Ctrl + I
Italic
Makes the selection italic (toggle)

113
Ctrl + J
JustifyPara
Aligns the paragraph at both the left and the right indent

114
Ctrl + L
LeftPara
Aligns the paragraph at the left indent

115
Down arrow
LineDown
Moves the insertion point down one line

116
Shift + down arrow
LineDownExtend
Extends the selection down one line

117
Up arrow
LineUp
Moves the insertion point up one line

118
Shift + up arrow
LineUpExtend
Extends the selection up one line

119
Ctrl + F11
LockFields
Locks the selected fields to prevent updating

120
Alt + Shift + K
MailMergeCheck
Checks for errors in a mail merge

121
Alt+Shift+E
MailMergeEditDataSource
Lets you edit a mail merge data source

122
Alt + Shift + N
MailMergeToDoc
Collects the results of the mail merge in a document

123
Alt Shift + M
MailMergeToPrinter
Sends the results of the mail merge to the printer

124
Alt + Shift + I
MarkCitation
Marks the text you want to include in the table of authorities

125
Alt + Shift + X
MarkIndexEntry
Marks the text you want to include in the index

126
Alt + Shift + O
MarkTableOfContentsEntry
Inserts a TC field (but it is far better to use Heading Styles to generate your Table of Contents instead)

127
Alt or F10
MenuMode
Makes the menu bar active

128
Alt + Shift + F11
MicrosoftScriptEditor
Starts or switches to Microsoft Development Environment application, allowing you to view the HTML/XML source code that would be behind the document if it were in .htm format (or that is behind it if it already is in .htm format).

129
Alt + Ctrl + F1
MicrosoftSystemInfo
Execute the Microsoft System Info application

130
F2
MoveText
Moves the selection to a specified location without using the clipboard (press Return to execute the more)

131
Tab
NextCell
Moves to the next table cell

132
F11
NextField
Moves to the next field

133
Alt + F7
NextMisspelling
Find next spelling error

134
Alt + down arrow
NextObject
Moves to the next object on the page

135
Ctrl + F6
NextWindow
Switches to the next document window, equivalent to selecting a document from the Window menu.

136
Ctrl+Shift+N
NormalStyle
Applies the Normal style

137
Ctrl + 0
OpenOrCloseUpPara
Sets or removes extra spacing above the selected paragraph

138
F6
OtherPane
Switches to another window pane in Normal View (for instance, if you have if you have a Footnotes pane open in Normal view and want to switch to the main docum
ent and back without closing the pane).

139
Alt + _
OutlineCollapse
Collapses an Outline in Outline View by one level

140
Alt+Shift+rt arrow
OutlineDemote
Demotes the selected paragraphs one heading level

141
Alt + +
OutlineExpand
Expands an Outline in Outline View by one level

142
Alt+Shift+down arrow
OutlineMoveDown
Moves the selection below the next item in the outline

143
Alt+Shift+up arrow
OutlineMoveUp
Moves the selection above the previous item in the outline

144
Alt+Shift+left arrow
OutlinePromote
Promotes the selected paragraphs one heading level

145
Alt + Shift + L
OutlineShowFirstLine
Toggles between showing the first line of each paragraph only or showing all of the body text in the outline

146
Ins
Overtype
Toggles the typing mode between replacing and inserting

147
PgDn
PageDown
Moves the insertion point and document display to the next screen of text

148
Shift+ PgDn
PageDownExtend
Extends the selection and changes the document display to the next screen of text

149
PgUp
PageUp
Moves the insertion point and document display to the previous screen of text

150
Shift + PgUp
PageUpExtend
Extends the selection and changes the document display to the previous screen of text

151
Ctrl + down arrow
ParaDown
Moves the insertion point to the beginning of the next paragraph

152
Shift + Ctrl + down arrow
ParaDownExtend
Extends the selection to the beginning of the next paragraph

153
Ctrl + up arrow
ParaUp
Moves the insertion point to the beginning of the previous paragraph

154
Shift + Ctrl + up arrow
ParaUpExtend
Extends the selection to the beginning of the previous paragraph

155
Ctrl+Shift+V
PasteFormat
Applies the previously copied formatting to selection

156
Shift + Tab
PrevCell
Moves to the previous table cell

157
Shift + F11
PrevField
Moves to the previous field

158
Alt + up arrow
PrevObject
Moves to the previous object on the page

159
Ctrl + Shift + F6
PrevWindow
Switches back to the previous document window

160
Sfift+F4
RepeatFind
Repeats Go To or Find to find the next occurrence

161
Ctrl+Spacebar
ResetChar
Makes the selection the default character format of the applied style

162
Ctrl+Q
ResetPara
Makes the selection the default paragraph format of the applied style

163
Ctrl +R
RightPara
Aligns the paragraph at the right indent

164
Ctrl + *
ShowAll
Shows/hides all nonprinting characters

165
Alt + Shift + A
ShowAllHeadings
Displays all of the heading levels and the body text in Outline View

166
Ctrl + <
ShrinkFont
Decreases the font size of the selection

167
Ctrl + [
ShrinkFontOnePoint
Decreases the font size of the selection by one point

168
Ctrl + Shift + K
SmallCaps
Makes the selection small capitals (toggle)

169
Ctrl + 1
SpacePara1
Sets the line spacing to single space

170
Ctrl + 5
SpacePara15
Sets the line spacing to one-and-one-half space

171
Ctrl + 2
SpacePara2
Sets the line spacing to double space

172
Ctrl + F3
Spike
Deletes the selection and adds it to the “Spike” AutoText entry (which allows you to move text and graphics from nonadjacent locations)

173
Alt + PgUp
StartOfColumn
Moves to the first cell in the current column

174
Ctrl+Shift+Home
StartOfDocExtend
Extends the selection to the beginning of the first line of the document

175
Ctrl +Home
StartOfDocument
Moves the insertion point to the beginning of the first line of the document

176
Home
StartOfLine
Moves the insertion point to the beginning of the current line

177
Shift+Home
StartOfLineExtend
Extends the selection to the beginning of the current line

178
Alt+Home
StartOfRow
Moves to the first cell in the current row

179
Alt+Ctrl+PgUp
StartOfWindow
Moves the insertion point to the beginning of the first visible line on the screen

180
Shift+ Alt+Ctrl+PgUp
StartOfWindowExtend
Extends the selection to the beginning of the first visible line on the screen

181
Strl + Shift + S
Style
Activates the Style drop-down on the Formatting toolbar

182
Ctrl + =
Subscript
Makes the selection subscript (toggle)

183
Ctrl + +
Superscript
Makes the selection superscript (toggle)

184
Ctrl + Shift + Q
SymbolFont
Applies the Symbol font to the selection

185
Alt A, F
TableAutoFormat
Applies a set of formatting to a table

186
Alt A, H
TableHeadings
Toggles table headings attribute on and off

187
Alt + click
(Alt + drag to select several)
TableSelectColumn
Selects the current column in a table

188
Click in left margin
TableSelectRow
Selects the current row in a table

189
Alt + double-click
TableSelectTable
Selects an entire table

190
Alt + Ctrl + U
TableUpdateAutoFormat
Updates the table formatting to match the applied Table Autoformat settings

191
Shift + F9 (Alt + F9 toggles all field codes on or off)
ToggleFieldDisplay
Shows the field codes or the results for the selection (toggle)

192
Alt T, C
ToolsCustomize
Allows you to customizes the Word user interface (menus, keyboard and toolbars) and store the customizations in a template (defaults to Normal.dot, so be careful!)

193
Alt + F8
ToolsMacro
Runs, creates, deletes, or revises a macro

194
F7
ToolsProofing
Checks the spelling and grammar in the active document

195
Ctr.l + Shift + E
ToolsRevisionMarksToggle
Toggles track changes for the active document

196
Shift + F7
ToolsThesaurus
Finds a synonym for the selected word

197
Ctrl+U
Underline
Formats the selection with a continuous underline (toggle)

198
Ctrl + Shift + T
(or drag the ruler)
UnHang
Decreases the hanging indent

199
Ctrl + Shift + M
(or drag the ruler)
UnIndent
Moves the left indent to the previous tab stop

200
Ctrl+Shift+F9
UnlinkFields
Permanently replaces the field codes with the results

201
Ctrl + Shift + F11
UnlockFields
Unlocks the selected fields for updating

202
F9
UpdateFields
Updates and displays the results of the selected fields

203
Ctrl + Shiift + F7
UpdateSource
Copies the modified text of a linked file back to its source file

204
Hover over comment
ViewAnnotations
Show or hide the comment pane

205
Dbl-click the endnote reference
ViewEndnoteArea
If in Normal View, opens a pane for viewing and editing the endnote (toggle). If in Page/Print Layout View, switches from the body text to the endnote or vice versa

206
At + F9
ViewFieldCodes
Shows the field codes or results for all fields (toggle)

207
Dbl-click the footnote reference
ViewFootnoteArea
If in Normal View, opens a pane for viewing and editing the footnote (toggle). If in Page/Print Layout View, switches from the body text to the fo
otnote or vice versa.

208
Alt V, F
ViewFootnotes
If in Normal View, opens a pane for viewing and editing footnotes and endnotes (toggle). If in Page/Print Layout View, switches from the body text to the footnotes/endnotes or vice versa.

209
Alt V, H
ViewHeader
Displays header in page layout view

210
Alt V, N
(or Alt + Ctrl + N)
ViewNormal
Changes the editing view to normal view

211
Alt V, O
(or Alt + Ctrl + O)
ViewOutline
Displays a document’s outline

212
Alt V, P
(or Alt + Ctrl + P)
ViewPage
Displays the page more-or-less as it will be printed, and allows editing (In Word 2000 the menu item is called Print Layout, but fortunately the command hasn’t changed.

213
Alt + F11
ViewVBCode
Shows the VB editing environment (Tools + Macro + Visual Basic Editor)

214
Alt + left arrow
WebGoBack
Backward hyperlink (useful if you clicked on a page number hyperlink in the table of contents and then want to return to the TOC)

215
Alt + rt arrow
WebGoForward
Forward hyperlink

216
Alt W, A
WindowArrangeAll
Arranges windows as non-overlapping tiles

217
Ctrl + left arrow
WordLeft
Moves the insertion point to the left one word

218
Shift + Ctrl + left arrow
WordLeftExtend
Extends the selection to the left one word

219
Ctrl + rt arrow
WordRight
Moves the insertion point to the right one word

220
Shift + Ctrl + rt arrow
WordRightExtend
Extends the selection to the right one word

221
Ctrl + Shift + W
WordUnderline
Underlines the words but not the spaces in the selection (toggle)

Hidden Program In Microsoft windows

1- Private Character Editor
This program is for designing icons and Characters(Alphapet)
Click :start
Then :run
type :EUDCEDIT

2- iExpress
This Program is for conerting your files to EXCUTABLE files
Click : start
Then : run
type : iexpress

3-Disk Cleanup
This program used for cleaning harddisk to offer space
Click : start
Then : run
type : cleanmgr

4-Dr Watson
This program Is for repairing problems in Windows
Click : start
Then : run
type : drwtsn32

5-Windows Media Player 5.1
Opens the old media player
Click : start
Then : run
type : mplay32

Program …………. CODE
__________ __________

Character Map = charmap

DirectX diagnosis = dxdiag

Object Packager = packager

System Monitor = perfmon

Program Manager = progman

Remote Access phone book = rasphone

Registry Editor = regedt32

File siganture verification tool = sigverif

Volume Contro = sndvol32

System Configuration Editor = sysedit

Syskey = syskey

Microsoft Telnet Client = telnet